---------- Post added at 09:24 PM ---------- Previous post was at 09:19 PM ----------
Pickup the flash file before you plug in the tablet. Only plug in tablet after you have setup Flashtool waiting, it's manufacturing tool made to flash 100 tablets / hour. When tablet is in dnx mode its showing to windows PID 0A65 when flash tool commances tablet to go droidboot mode it will change to device id PID 0FFF. flash tool waits for these devices to appear, if Intel drivers are present it will work.
Ok, this is where my noob really shows. I tried the MFT in every order - flash file picked first, then connected while in Dnx mode, and vice versa. Same results. Where, other than settings, do I see PID change? I installed all the drivers that were in your MFT link. I did get a bunch of red warnings that the drivers were not validated - to which I clicked install anyway - at least 8-10 times.
---------- Post added at 09:27 PM ---------- Previous post was at 09:24 PM ----------
Ah, never mind on the PID - see that now in device manager. It's staying 0A65. It's showing under Samsung Android Device. There is also an Intel Soc USB Driver, but the only one that drops out when I disconnect the cable (while device is in DnX mode) is the Samsung one.