Note: that version is UNOFFICIAL TWRP-3.3.0-0524
ADB means Android Debug Bridge, and it is software that you should always do have installed on your PC.
Make sure that you have the drivers for your phone installed on your PC.
If not, you can download and install them from here https://devsjournal.com/usb-drivers-...d-devices.html
You must also install: Minimal ADB & Fastboot, you can download the software
from here https://devsjournal.com/download-min...boot-tool.html
Your device needs this with unlocked bootloader
if it is not unlocked do the tutorial to unlock HERE
Make sure you have enabled 'USB Debugging' and OEM Unlocking on your device
Settings -> Advanced settings -> Developer Options
PAY ATTENTION: If you do not see the Developer Options menu you need to do this:
Settings -> Device Info -> tap 6 or 7 times on the 'ZUI version' entry
A pop-up should appear, telling you 'now you are a developer'
1) Download TWRP: recovery-TWRP-3.3.0-0524-LENOVO_Z5PRO_GT-CN-wzsx150.img
2) After getting the TWRP file put it in the same ADB folder
3) Now start the phone in bootlader by doing this:
Connect the phone to the PC
Start the Minimal ADB & Fastboot program from the PC
On the PC screen, type:
adb reboot bootloader
(A request may appear on the phone screen with permission of USB debugging, accept it)
The phone will now restart in Bootloader mode.
4) Now that you are in bootloader mode, from the PC, from the screen
Minimal ADB and Fastboot type:
fastboot flash recovery recovery-TWRP-3.3.0-0524-LENOVO_Z5PRO_GT-CN-wzsx150.img
Sending 'recovery' (98304 KB) OKAY [ 5.970s]
Writing 'recovery' OKAY [ 0.539s]
.How to Install Root Magisk:
Developer Team: LR.Team