[AOSP] [KERNEL] Deathly ZE551ML/ZE550ML

Status
Not open for further replies.
Search This thread
By:
Advanced…
W

Wishx97

Member
May 23, 2014
22
5
Is it doesn't work on cm12.1 now?I installed it on my ze551ml and the battery percent went wrong...
 

Attachments

  • Screenshot_2015-10-10-13-17-58.png
    Screenshot_2015-10-10-13-17-58.png
    166.2 KB · Views: 671
  • Screenshot_2015-10-10-13-18-06.png
    Screenshot_2015-10-10-13-18-06.png
    105.6 KB · Views: 677
  • Like
Reactions: JuanMnz93
B

bmwkeith

Senior Member
Nov 2, 2011
584
198
There have been too many changes to CM since deathly was developed. It probably won't boot, and even if it does you will be left with a lot of weird problems.
 
Status
Not open for further replies.

Similar threads

say99
[KERNEL]FlareM[LINARO][GCC 5.3.1][AOSP 6.0.x] ZE551ML/ZE550ML
Replies
3K
Views
292K
pilger
pilger
B
BORETS ROM Stock Edition for ZE551ML/550ML/Zoom ZX551ML
Replies
3K
Views
346K
M
Magister54
nutcasev1.5
  • Poll
[Kernel]Holo Kernel[AOSP/LinOS14.1][-Ofast][LINARO][Z00A/8]
Replies
3K
Views
256K
B
bluedreamms
TheSSJ
[KERNEL][LINARO][UC][F2FS] Project T - Custom Kernel for ZenFone 2[THE END]
Replies
1K
Views
284K
G
germarc
Nyks45
[KERNEL]OctoDex[GCC 5.3.1][CM-13.0/AOSP6.0.X] ZE551ML/ZE550ML
Replies
516
Views
86K
DyorenZ
DyorenZ

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 30
    deadman96385
    deadman96385
    Code: 
    /*
 *
 * I not responsible for bricked devices, dead SD cards,
 * thermonuclear war, or you getting fired because the alarm app failed. Please
 * do some research if you have any concerns do some research
 * YOU are choosing to make these modifications,
 * and if you point the finger at me for messing up your device, i will laugh at you.
 *
 */

    Kernel Features:
    Updated to latest kernel.org version (3.10.85)
    Exfat Support
    Interactive Governor from fugu
    VNSWAP support
    UKSM
    BLK-throttle improvements
    Async FSync from HTC
    CDG congestion control
    Optimized Sfck Compression
    Tons of under the hood optimizations and tweaks (entropy, mm, readahread, slub, fs, fuse, int_sqrt, memcopy, lib/string)
    Compiled with Google's 4.9 x86_64 toolchain instead of 4.8

    The following IO's added:
    SIO
    SIOPLUS
    FIOPS
    ZEN
    FIFO
    VR
    BFQ
    ROW

    The following cpu govs added:
    BioShock
    ConverativeX
    LionHeart
    YankActive
    Adaptive
    Wheatley
    LagFree (Default)

    CM Downloads:



    Slim Downloads:


    0.4 Z00A
    0.4 Z008

    Slim Older versions:

    None yet


    Paranoid Android Downloads:


    0.4 Z00A

    Paranoid Android Older versions:

    None yet


    Kernel Source:
    Here

    Please look at what zip you are downloading currently i only support CM, Slim, PA please do not flash it on any alternate roms or stock

    Credits:
    @TheSSJ for his work on the stock kernel
    @crpalmer , @jrior001 for bringing up the zf2 and its kernel
    @dorimanx for his universal Exfat
    @Mazda for bring the kernel up to the latest kernel.org
    View
    13
    deadman96385
    deadman96385
    Changelog:

    0.4
    Added ROW IO
    Added Lagfree CPU Gov (New Default)
    Blk-Throttle improvements
    CDG congestion control
    Enabled/Added the following CDG schedulers:
    HHF, FQ_PIE, FQ, FIFO, CAKE
    Optimized Sfck Compression
    Initial Z008 support
    Alphabetize the IO's and CPU Gov's
    Kernel updated to 3.10.85


    0.3
    ADB fixed (forgot to build 0.2 with the cm patches)
    Added the BFQ IO (Will switch it to default if my testing goes well)
    Added Async Fsync from HTC
    Added UKSM support
    VNSWAP support aka Virtual Nand Swap Device which simulates Swap Area (Someone on reddit wanted it added and it looks like it could be good)
    Tons of under the hood optimizations and tweaks (entropy, mm, readahread, slub, fs, fuse, int_sqrt, memcopy, lib/string)

    0.2
    Removed THESSJACTIVE cpu gov (Added its hotplugging to YankActive)
    Add Wheatley cpu gov (New Default)
    Added all of the TCP congestion algorithm's (New default is VENO)
    Cleaned up the source code so everything has proper authorship and its cleaner

    0.1
    Initial Release
    View
    6
    deadman96385
    deadman96385
    Kernel Adiutor is my preferred method of controlling the kernel.

    Screenshots (Will not be updated often):

    2015_07_28_2.png
    2015_07_28_1.png
    2015_07_28.png
    View
    5
    TheSSJ
    TheSSJ
    I never expected that someone would have made a kernel for cm *irony off*

    Great job man, looking forward to see the features you are going to implement :)
    View
    4
    deadman96385
    deadman96385
    My Current setup:

    Regular use i do not game at all on this device, which is why i dial back the cpu max (There is no need for 2.3 GHz)

    CPU Gov: Lagfree
    IO Scheduler: cfq
    IO Internal Storage Read-ahead: 1024 kb
    IO External Storage Read-ahead: 512 kb
    TCP Congestion algorithm: Veno
    Max CPU Freq: 1583 MHz
    Min CPU Freq: 500 MHz


    Packet Schedulers/Congestion Avoidance Algorithms:
    Info taken from here

    CDG vs. Cubic vs. Westwood:

    CDG
    CAIA-Delay Gradient (CDG) is a hybrid congestion control algorithm which reacts to both packet loss and inferred queuing delay. It attempts to operate as a delay-based algorithm where possible, but utilises heuristics to detect loss-based TCP cross traffic and will compete effectively as required. CDG is therefore incrementally deployable and suitable for use on shared networks. During delay-based operation, CDG uses a delay-gradient based probabilistic backoff mechanism, and will also try to infer non congestion related packet losses and avoid backing off when they occur. During loss-based operation, CDG essentially reverts to reno-like behaviour. CDG switches to loss-based operation when it detects that a configurable number of consecutive delay-based backoffs have had no measurable effect. It periodically attempts to return to delay-based operation, but will keep switching back to loss-based operation as required.

    Cubic
    CUBIC is an enhanced version of BIC: it simplifies the BIC window control and improves its TCP-friendliness and RTT-fairness. The window growth function of CUBIC is governed by a cubic function in terms of the elapsed time since the last loss event. Our experience indicates that the cubic function provides a good stability and scalability. Furthermore, the real-time nature of the protocol keeps the window growth rate independent of RTT, which keeps the protocol TCP friendly under both short and long RTT paths.

    Westwood
    TCP Westwood estimates the available bandwidth by counting and filtering the flow of returning ACKs and adaptively sets the cwnd and the sshtresh after congestion by taking into account the estimated bandwidth.TCP Westwood, is a sender-side-only modification to TCP New Reno that is intended to better handle large bandwidth-delay product paths (large pipes), with potential packet loss due to transmission or other errors (leaky pipes) and with dynamic load (dynamic pipes). TCP Westwood+ is an evolution of TCP Westwood, in fact it was soon discovered that the Westwood bandwidth estimation algorithm did not work well in the presence of reverse traffic due to ACK compression. Westwood+ is friendly towards TCP Reno and fairer than Reno in bandwidth allocation.


    Packet Schedulers:

    Why use a non default packet scheduler?
    Packet schedulers are a portion of the kernel that queues network data on a specific interface and governs how they are transmitted and received including buffers. Below I will breakdown a couple of the packet schedulers included in this kernel.

    fq_codel
    FQ_Codel (Fair Queuing Controlled Delay) is queuing discipline that combines Fair Queuing with the CoDel AQM scheme. FQ_Codel uses a stochastic model to classify incoming packets into different flows and is used to provide a fair share of the bandwidth to all the flows using the queue. Each such flow is managed by the CoDel queuing discipline. Reordering within a flow is avoided since Codel internally uses a FIFO queue.

    pfifo_fast
    The FIFO algorithm forms the basis for the default qdisc on all Linux network interfaces (pfifo_fast). It performs no shaping or rearranging of packets. It simply transmits packets as soon as it can after receiving and queuing them. This is also the qdisc used inside all newly created classes until another qdisc or a class replaces the FIFO.

    A real FIFO qdisc must, however, have a size limit (a buffer size) to prevent it from overflowing in case it is unable to dequeue packets as quickly as it receives them. Linux implements two basic FIFO qdiscs, one based on bytes, and one on packets. Regardless of the type of FIFO used, the size of the queue is defined by the parameter limit. For a pfifo the unit is understood to be packets and for a bfifo the unit is understood to be bytes.

    pie
    PIE is designed to control delay effectively. First, an average dequeue rate is estimated based on the standing queue. The rate is used to calculate the current delay. Then, on a periodic basis, the delay is used to calculate the dropping probabilty. Finally, on arrival, a packet is dropped (or marked) based on this probability. PIE makes adjustments to the probability based on the trend of the delay i.e. whether it is going up or down.The delay converges quickly to the target value specified. alpha and beta are statically chosen parameters chosen to control the drop probability growth and are determined through control theoretic approaches. alpha determines how the deviation between the current and target latency changes probability. beta exerts additional adjustments depending on the latency trend. The drop probabilty is used to mark packets in ecn mode. However, as in RED, beyond 10% packets are dropped based on this probability. The bytemode is used to drop packets proportional to the packet size.

    fq
    A packet scheduler is charged with organizing the flow of packets through the network stack to meet a set of policy objectives. The kernel has quite a few of them, including CBQ for fancy class-based routing, CHOKe for routers, and a couple of variants on the CoDel queue management algorithm. FQ joins this list as a relatively simple scheduler designed to implement fair access across large numbers of flows with local endpoints while keeping buffer sizes down; it also happens to implement TCP pacing.

    FQ keeps track of every flow it sees passing through the system. To do so, it calculates an eight-bit hash based on the socket associated with the flow, then uses the result as an index into an array of red-black trees. The data structure is designed, according to Eric, to scale well up to millions of concurrent flows. A number of parameters are associated with each flow, including its current transmission quota and, optionally, the time at which the next packet can be transmitted.

    That transmission time is used to implement the TCP pacing support. If a given socket has a pace specified for it, FQ will calculate how far the packets should be spaced in time to conform to that pace. If a flow's next transmission time is in the future, that flow is added to another red-black tree with the transmission time used as the key; that tree, thus, allows the kernel to track delayed flows and quickly find the one whose next packet is due to go out the soonest. A single timer is then used, if needed, to ensure that said packet is transmitted at the right time.

    The scheduler maintains two linked lists of active flows, the "new" and "old" lists. When a flow is first encountered, it is placed on the new list. The packet dispatcher services flows on the new list first; once a flow uses up its quota, that flow is moved to the old list. The idea here appears to be to give preferential treatment to new, short-lived connections — a DNS lookup or HTTP "GET" command, for example — and not let those connections be buried underneath larger, longer-lasting flows. Eventually the scheduler works its way through all active flows, sending a quota of data from each; then the process starts over.

    There are a number of additional details, of course. There are limits on the amount of data queued for each flow, as well as a limit on the amount of data buffered within the scheduler as a whole; any packet that would exceed one of those limits is dropped. A special "internal" queue exists for high-priority traffic, allowing it to reach the wire more quickly. And so on.

    One other detail is garbage collection. One problem with this kind of flow tracking is that nothing tells the scheduler when a particular flow is shut down; indeed, nothing can tell the scheduler for flows without local endpoints or for non-connection-oriented protocols. So the scheduler must figure out on its own when it can stop tracking any given flow. One way to do that would be to drop the flow as soon as there are no packets associated with it, but that would cause some thrashing as the queues empty and refill; it is better to keep flow data around for a little while in anticipation of more traffic. FQ handles this by putting idle flows into a special "detached" state, off the lists of active flows. Whenever a new flow is added, a pass is made over the associated red-black tree to clean out flows that have been detached for a sufficiently long time — three seconds in the current patch.

    cake
    The CAKE Principle:
    (or, how to have your cake and eat it too)

    This is a combination of several shaping, AQM and FQ
    techniques into one easy-to-use package:

    - An overall bandwidth shaper, to move the bottleneck away
    from dumb CPE equipment and bloated MACs. This operates
    in deficit mode (as in sch_fq), eliminating the need for
    any sort of burst parameter (eg. token buxket depth).
    Burst support is limited to that necessary to overcome
    scheduling latency.

    - A Diffserv-aware priority queue, giving more priority to
    certain classes, up to a specified fraction of bandwidth.
    Above that bandwidth threshold, the priority is reduced to
    avoid starving other classes.

    - Each priority class has a separate Flow Queue system, to
    isolate traffic flows from each other. This prevents a
    burst on one flow from increasing the delay to another.
    Flows are distributed to queues using a set-associative
    hash function.

    - Each queue is actively managed by Codel. This serves
    flows fairly, and signals congestion early via ECN
    (if available) and/or packet drops, to keep latency low.
    The codel parameters are auto-tuned based on the bandwidth
    setting, as is necessary at low bandwidths.

    The configuration parameters are kept deliberately simple
    for ease of use. Everything has sane defaults. Complete
    generality of configuration is not a goal.

    The priority queue operates according to a weighted DRR
    scheme, combined with a bandwidth tracker which reuses the
    shaper logic to detect which side of the bandwidth sharing
    threshold the class is operating. This determines whether
    a priority-based weight (high) or a bandwidth-based weight
    (low) is used for that class in the current pass.

    This qdisc incorporates much of Eric Dumazet's fq_codel code,
    customized for use as an integrated subordinate.


    How to apply a packet scheduler:

    1. Open terminal on your device
    2. Use the "su" command to become root
    3. Use tc to change the packet scheduler(qdisc) on your device. I have included an example below, the first line is for WiFi and the second for data. In the example, we are setting the qdisc to fq_pie, which is a mix of PIE with per flow rate shaping from fq.
    Code: 
     tc qdisc add dev wlan0 root fq_pie
 tc qdisc add dev rmnet_data0 root fq_pie
    4. Confirm your packet scheduler has been applied by using the tc tool again. I have included an example below.
    Code: 
    tc  qdisc
    To use another packet scheduler after applying a previous one, you will need to either reboot or remove the added qdisc from each interface using the command I have included below.
    Code: 
    tc qdisc del root dev wlan0
tc qdisc del root dev rmnet_data0
    View

New posts